Technical data

VAXserver/MicroVAX 3300/3400 Conversion
1.1 Summary of Conversion
9. Remove the old CPU module.
10. Install the new KA660-AA/BA (M7626) CPU module.
11. Upgrade the old memory modules to MS650-BA/BB, if necessary.
12. Reconnect all CPU cables.
13. Reinstall the CPU I/O panel.
14. Reinstall the CPU I/O cover cables.
15. Replace the front panel.
16. Install the new medallion and labels.
17. Run diagnostics to verify system operation.
18. Have the customer verify that the system boots and operates correctly.
19. Complete the forms in Appendix A.
1.2 Unpacking the Kit
To unpack the kit:
1. Make sure there is no external damage to the shipping container, such as
dents, holes, or crushed corners.
2. Unpack the conversion kit and check its contents against the shipping
invoice.
Caution
Wear an antistatic wrist strap and use an antistatic mat during module
handling to prevent static discharge and damage to modules. The wrist
strap and mat are in the antistatic kit in the Digital Services toolkit.
3. Unpack the CPU module and place it on a grounded antistatic mat.
4. Save the packing material to use when you return the old module to
Digital.
5. If any item is missing or damaged:
a. Contact the customer’s sales representative.
b. Contact the customer’s delivery agent.
1–2 VAXserver/MicroVAX 3300/3400 Conversion