User guide

www.vax.co.uk

operation/ maintenance

Rinse dirty water tank and filter with warm tap water.

Wipe and let dry thoroughly before storing to prevent

mildew from forming (Fig.4/20).

NOTE: Do not use any chemicals when cleaning.

Replacing dirty water tank in base of carpet washer

While making sure the front of the dirty water tank is

resting on the base, place the rear of the tank into the

base of the cleaner (Fig.4/21).

Push handle down until it latches (Fig.4/22).

NOTE: Do not store cleaner with solution in reservoir

or dirty water in dirty water tank. Mineral deposits and

mildew can form which will affect the performance of

the carpet washer.

5. Maintenance

Transporting & storing carpet washer

Put handle in upright locked position (Fig.5/1).

Turn unit off. Store cord and above floor cleaning

attachments if used.

Tilt unit back on rear wheels and push forward (Fig.5/2).

NOTE: The unit can also be transported between

rooms or floors using the carry handle.

Before storing carpet washer:

1. Empty and rinse clean water tank and dirty

water tank.

2. Replace empty clean water tank and dirty water

tank.

3. Ensure that brushes and underside of unit are fully

dry prior to storing on a carpeted or

wood surface.

NOTE: Do not store unit with a full clean water tank or

dirty water tank.

IMPORTANT: Do not transport the carpet washer

with either the clean water tank or dirty water

tank full.

Fig.4/20

Fig.5/1

Fig.5/2

Fig.4/21

Fig.4/22

V-028PU User Guide v2.qxd:V-0268PU User Guide 12/3/08 09:15 Page 10