Technical data

that the cable is clear. Each module location will be identified as well as
the enclosure used. If an enclosure is not identified, then the module or
component is used in both enclosures.
3.7 Removing the System Control Panel
To remove the system control panel (Figure 3–21) follow the listed steps:
1. Open the upper access door.
2. Release the top captive screw securing the assembly.
3. Detach the interface cable.
4. Remove the system control panel.
5. Install a system control panel in the reverse order.
Figure 3–21: Removing the System Control Panel (SCP)
1234
-- OPEN --
MLO-004217
-- OPEN --
Off
On
Switches
1234
Switches
3–30 BA430/BA440 Enclosure Maintenance