Technical data

Chapter 2
Installation
This chapter contains the procedure for installing the BA430/BA440
pedestal enclosure.
2.1 Site Preparation Considerations
2.1.1 BA430/BA440 Physical Dimensions
Figure 2–1 shows the dimensions of the BA430/BA440 enclosure. You must
leave at least 61 cm (24 in) of clearance in front of the system to access the
doors and the system controls. You must also leave at least 5 cm (2 in) of
clearance at the sides and rear for airflow. Since the base of the enclosure
is 5 cm (2 in) wider than the cabinet in front and rear, you can place the
rear of the system against a wall or table, and the system has enough space
around it for adequate airflow.
CAUTION: Due to the weight of the equipment, Digital recommends that at
least two people to move system and terminal boxes.
Installation 2–1