Specifications

1-3A5
Proprietary and Confidential
TCU SCREENS SYSTEM SERVICE, CONFIGURATION
Low power output warning level – yellow bar. 80% typ.
High power output fault – red bar
Sets 100% power output level on bar
Power setting in active LPU. May be lower than
Fwd Power Ref. if bad module or in foldback.
Set desired TPO (W) here.
Frequency in MHz. Sets both LPU’s.
Low power output fault level – red bar.
Set desired TPO % here (0-100%).
Limited by Nominal Power Out
These Config settings go out to LPU’s.