Specifications

1-1.15
Proprietary and Confidential
PLATINUM VAX – OPERATING VOLTAGES
• Transmitters are configurable on-site for single or three phase AC
connection. Loads are split to keep max components on line if
phase is lost.
• If three phase power is used then supply voltage (per phase) must
be between 208 & 240VAC for LPUs and PABs.
• Check voltage at plugs 1 at a time before initial turn on.
• An optional in-rack AC distribution chassis (deluxe rack) provides
individual circuit breaker protection for each AC input. AC
distribution panel not included in basic rack.
• Refer to the wiring diagram, AC distribution drawing 843-5610-065
for more detail.