Technical data

System Dump Analyzer
SHOW CLUSTER
--- PINTO System Block (SB) 8041A120 ---
System ID 00000000F10E Local software type HSC
Max message size 66 Local software vers. X301
Max datagram size 62 Local software incarn. 8355FE00
Local hardware type HS50 008DA59A
Local hardware vers. 022702220222 SCS poller timeout 000F
022202220222 SCS poller enable mask 01
--- Path Block (PB) 8041C400 ---
Status: 0000
Remote sta. addr. 00000000000E Remote port type HSC
Remote state 00000000000E Number of data paths 2
Remote hardware rev. 00000225 Cables state A-OK B-OK
Remote func. mask 4F710200 Local state OPEN
Resetting port 0E Port dev. name PAB0
Handshake retry cnt. 1 SCS MSGBUF address 80390270
Msg. buf. wait queue empty PDT address 801CEA20
--- DORIS System Block (SB) 8041AA20 ---
System ID 0000000008A9 Local software type VMS
Max message size 112 Local software vers. V5.0
Max datagram size 576 Local software incarn. A9D31760
Local hardware type V780 008DA59B
Local hardware vers. 010E0138207A SCS poller timeout 000C
000030030E10 SCS poller enable mask 00
--- Path Block (PB) 80437E80 ---
Status: 0000
Remote sta. addr. 000000000002 Remote port type CI780
Remote state ENAB Number of data paths 2
Remote hardware rev. 00040003 Cables state A-OK B-OK
Remote func. mask FFFFFF00 Local state OPEN
Resetting port 02 Port dev. name PAB0
Handshake retry cnt. 1 SCS MSGBUF address 8036F0B0
Msg. buf. wait queue empty PDT address 801CEA20
This example shows a subset of a typical output for the SHOW CLUSTER/SCS
command. In this system, there are three nodes (DORIS, GUS, and SOLLY), and
there are two HSCs (PINTO and DODGER). After the summary information in
the first two screen displays, specific information for each system block and its
associated path block is shown.
SDA–89