Technical data

System Dump Analyzer
SHOW SUMMARY
Table SDA–23 (Cont.) Process Information in the SHOW SUMMARY Display
Column Contents
PCB Address of the process control block
PHD Address of the process header
Wkset Number (in decimal) of pages currently in the working set of
the process
Example
SDA> SHOW SUMMARY/IMAGE
Current process summary
-----------------------
Extended Indx Process name Username State Pri PCB PHD Wkset
-- PID -- ---- --------------- ----------- ------- --- -------- -------- -----
33C00101 0001 SWAPPER HIB 16 8000C3C0 8000C200 0
33C00205 0005 _RTA5: SIVAD LEF 4 80482FE0 82120E00 293
33C00106 0006 ERRFMT SYSTEM HIB 8 80432950 80DB4600 126
$254$DUA200:[SYS6.SYSCOMMON.][SYSEXE]ERRFMT.EXE;1
33C00107 0007 CACHE_SERVER SYSTEM HIB 16 80432AC0 81121E00 120
$254$DUA200:[SYS6.SYSCOMMON.][SYSEXE]FILESERV.EXE;400
33C00108 0008 CLUSTER_SERVER SYSTEM HIB 10 804331F0 81246600 313
$254$DUA200:[SYS6.SYSCOMMON.][SYSEXE]CSP.EXE;300
.
.
.
33C0010D 000D NETACP DECNET CUR 00 10 8044C6D0 816D8600 1500
$254$DUA200:[SYS6.SYSCOMMON.]<SYSEXE>NETACP.EXE;3
33C0010E 000E EVL DECNET HIB 4 8044CD60 817FCE00 68
$254$DUA200:[SYS6.SYSCOMMON.]<SYSEXE>EVL.EXE
.
.
.
The SHOW SUMMARY/IMAGE command describes all active processes in the
system at the time of the system failure. Note that the process NETACP is in the
CUR state on CPU 00 of a multiprocessor system at the time of the failure.
SDA–180