Instruction manual

Condensate Pumps | 36
Brazing Alloys | 57
Phosphorus Brazing Alloys - Self Fluxing
Description AG % Content Dimensions (mm) Pack Qty Code
Rod dia Rod Length
Eutectic RB 5246 0.0 2.5 500 1kg 171914
Eutectic 180 <0.5 2.4 500 1kg 171905
Rothenberger Rolot S2 0.8 22 500 1kg 166626
Eutectic RB 2 0.8 2_ 500 1kg 171915
Phosbraze 8 1.0 22 600 1kg 166618
Eutectic 1805 2.0 2.4 500 1kg 171913
Phosbraze 2 2.0 2.0 600 1kg 166634
Eutectic RB 5280 2.0 2.5 500 1kg 171916
Phosbraze 5 5.0 3.0 600 1kg 170933
Eutectic RB 5286 5.0 3 500 1kg 171917
Phosbraze 1 15.0 2.0 600 Each 170909
Suitable for flux-free brazing of copper and high quality copper alloys in air, or in a protective atmosphere furnace.
A flux will normally be required for parent materials with copper contents of less than 90%.
Silver Brazing Alloys - Cadmium-Free Grades
Description AG % Content Dimensions (mm) Pack Qty Code
Rod dia Rod Length
Silverbraze 38T 38.0 2.0 600 Each 170887
Silverbraze 38T Fluxed 38.0 2.0 500 6 170934
Eutectic 1665 40.0 2.4 500 5 171948
Eutectic 1665XFC Fluxed 40.0 2.0 500 5 171956
Silverbraze 55T 55.0 2.0 600 6 170936
Silverbraze 55T Fluxed 55.0 2.0 500 6 170935
Eutectic1020 56.0 1.5 500 5 rods 171920
Eutectic 1020XFC Fluxed 56.0 2.0 500 5 171964
The higher silver and tin-containing alloys in this group approach the level of properties exhibited by the cadmium
bearing grades, but lack the exceptional fluidity of the cadmium alloys.
They still offer the user the principal attributes of the silver brazing family.
Silver Brazing Alloys - Cadmium Bearing Grades
Description AG % Content Dimensions (mm) Pack Qty Code
Rod dia Rod Length
Easibraze 4 34.0 2.0 600 Each 170895
Easibraze 4 34.0 3 x 1 600 Each 170917
Easibraze 4 34.0 5 x 1 600 Each 170399
Easibraze 40 40.0 2.0 385 10 166642
Easibraze 40 Flux Coated 40.0 2.0 500 6 166669
The cadmium bearing group of alloys is the lowest melting and the most free flowing of all the silver bearing
categories. Health hazards presented by the emission of cadmium oxide fumes during brazing now limit their use.
Cadmium bearing rods should not be used in the construction of electrical or electronic equipment.
Fluxes
Description Pack Qty Code
Eutectic F257/F1 250g 171972
SP1 Flux Powder 250g 170453
SP1 Flux Powder 500g 175196
LP5 Copper/Gunmetal Flux for use with Rothenburger Rolot S2 200g 166812
Emery Cloth
www.hrponline.co.uk