Instruction manual

35 | Condensate Pumps
38 | Manifolds and Hoses
Refrigeration Service Manifolds and Gauges
Tel: [phone] Fax: [phone]
• Manifolds are supplied pre-assembled with gauges fitted to the
valve bar
• Valve bars are available as 2 valve or 4 valve models
• Gauges are pre-printed with a range of refrigerant saturation
temperatures
• All valve bars are aluminium (except Elanmax 2506-031 which is
brass)
• All 2 valve and 4 valve bars are fitted with a sight glass (except
R410A models)
• 1/4" SAE connections except R410A models which have 5/16"
SAE connections
• 3/8" SAE vacuum connections on all 4 valve models
• All gauges are fitted with blue and red protection boots
• Hoses are available separately in 90cm and 180cm lengths for
general use. 150cm lengths for R410A and 90cm and 180cm
3/8" vacuum hoses
• To provide maximum flexibility and choice hoses should be
selected separately for the required length from the table on
page 40 and added to the manifold kit
• Hoses are available with or without pre-fitted ball valves
• Manifold kit carrying cases are available for all models as shown
on page 40
Valve Manifold and Gauge Specification CPS Elanmax
Type Gauge Scale Refrigerant Part Code Part Code
(mm) No No
One Valve 80 Bar/°C R22/134a/404A/407C MV1JL (low side) 163203
- -
MV1JH (high side) 163205 - -
Two Valve 63 Bar/°C R22/134a/404A/407C - - 2506-031
(1)
167545
68 Bar/°C R134a/404A/407C MV2F
(1)
163207 - -
80 Bar/°C R22/134a/404A/407C MV2J
(2)
163209 2506-026
(1)
167547
80 Bar/°C R410A MV11A
(1)
163211 2506-038
(1)
167551
80 Bar/°C R410A MV11E
(2)
163213
- -
80 Bar/°C R410A MCO (No Sight Glass) 163214 - -
80 Bar/°C R600a/R290 MV2HC
(1)
163237 - -
Four Valve 80 Bar/°C R134a/404A/407C MV4K
(1)
163219 - -
80 Bar/°C R22/134a/404A/407C MV4J
(2)
163221 2506-036
(1)
167549
80 Bar/°C R410A MV12A
(1)
163223 2506-039
(1)
167553
80 Bar/°C R410A MV12E
(2)
163225 - -
(1) Class 1.6 Bourdon type
(2) Class 1.0 Bellows type.
CPS Manifold Set Elanmax Manifold Set