User`s guide

The VAX 6000 Platform Overview
Each slot of the XMI card cage is hardwired to a 4-bit node ID code that
corresponds to the physical slot number in the card cage. The node ID
number of the module is its slot position. The nodes are numbered 1
through E (hex) from right to left, as you view the card cage from the front
of the cabinet.
Figure 1–5 shows a cable used in the H9657 platform that inhibits
the +3.3V. With this cable installed VAX 6000 Models 200, 300, or 400
processors can be installed in this platform.
Figure 1–5 H7242 Inhibit Cable
msb-0449C-90
H7215 (10 PIN)
H7214 (12 PIN)
H7242 (12 PIN)
INTERLOCK (2 PIN) TO H7215
H7242 Inhibit Cable
6000-300
6000-400
6000-500
PN
Rev
Date
Vendor
36-24502-01-B01
17-02522-01
A01
003
CTI
H7206-B
1–8