User`s guide

DWMBB/A Module Registers
Control and Status Register (ACSR)
bits<16:10>
Name: Reserved
Mnemonic: None
Type: RO, 0
Reserved; must be zero.
bit<9>
Name: Short Timeout Enable
Mnemonic: SHORT TMO ENA
Type: R/W, 0
Short Timeout Enable, when set, enables the DWMBB to use the
smaller timeout range of from 0 to 960 s instead of the normal
timeout range of from 0 to 15 ms.
bit<8>
Name: Lockout Response Enable
Mnemonic: None
Type: R/W, 1
Lockout Response Enable, when set, enables the DWMBB to respond
to the XMI LOCKOUT L signal. The DWMBB defaults to the Full
XMI Lockout Mode after a power-up or XMI node reset.
bit<7>
)
Name: Lockout Assert Enable
Mnemonic: None
Type: R/W, 1
Lockout Assert Enable, when set, enables the DWMBB to assert
the XMI LOCKOUT L signal. The DWMBB defauts to the full XMI
Lockout Mode after a power-up or a node reset.
bit<6>
Name: Reserved
Mnemonic: None
Type: RO, 0
Reserved; must be zero.
3–88