User`s guide

DWMBB/A Module Registers
Bus Error Register (XBER)
bit<29>
Name: Node Halt
Mnemonic: NHALT
Type: RO, 0
Reserved; must be zero.
bit<28>
Name: XMI BAD
Mnemonic: XBAD
Type: RO, 0
Reserved; must be zero.
bit<27>
Name: Corrected Confirmation
Mnemonic: CC
Type: R/W1C, 0
CC sets when the DWMBB detects a single-bit CNF error. Single-bit
CNF errors are automatically corrected by the XCLOCK chip in the
XMI Corner.
bit<26>
Name: XMI Trigger
Mnemonic: XTRIG
Type: R/W1C, 0
Represents the state of the XMI TRIGGER line and is used by Digital
during development.
bit<25>
Name: Write Error Interrupt
Mnemonic: WEI
Type: RO, 0
Reserved; must be zero.
3–47