User guide

Vax Careline: AU: 1300 361 505
NZ: 0800 800 900
vax.com.au
vax.co.nz 18
Maintenance
(Keep your Vax as good as new)
If the dust bin can no longer be completely emptied (Refer to, “Emptying the dust bin module”, on page 17)
or if you can no longer remove dirt on the lter by hand:
1. Take out and empty the dust bin module as described under “Emptying the dust bin module” on page 17.
CAUTION: Dust bin and lter are washable, but they are not suitable for cleaning in washing machines
or dishwashers. Also, do not use detergents or brushes with hard bristles.
2. Thoroughly rinse out the dust bin by hand under cold running water or lukewarm water.
3. Thoroughly rinse out the lter by hand under cold running water or lukewarm water, until all the dirt is removed.
4. Let both the dust bin and lter dry for at least 24 hours at room temperature, until they are completely dry.
5. Insert the lter back into the bin (Fig. 27) and put the dust bin cover back on (Fig. 28).
6. Insert the dust bin module back into the appliance (Fig. 29) and put on the upper cover (Fig. 25). It will audibly
snap into place.
NOTE: The appliance will only work if the dust bin is installed correctly.
Cleaning dust bin and lter
26. 27. 28. 29.