User guide
Vax Careline: AU: 1300 361 505
NZ: 0800 800 900
vax.com.au
vax.co.nz 12
Operation
NOTE: Alternatively, you can choose “auto” with the “
A
“ key of the remote control (Fig. 12).
- Your robot will then undergo 2 complete cleaning cycles (including one charging cycle).
NOTE: Alternatively, you can guide the robot directly via the direction keys “
“, “ “, “ “, “ “ of the
remote control (Fig. 13).
- Your robot will then move into the chosen direction.
- Your robot can only move one direction at once.
NOTE: When the capacity of the battery pack diminishes, your robot searches for the signal of the docking
station, docks on and charges for approx. 4 to 5 hours. Once charged, the LEDs turn o and the robot can then
be used.
If it for any reason does not succeed in docking onto the docking station, you have to lift it manually onto the
docking station, see “Charging the battery pack for the rst time”, on page 9.
NOTE: Cli sensors detect stairs and other clis to avoid falling. A height dierence of 7 cm or more would be
judged as a cli. When a cli is detected, your robot will move backwards to avoid falling. Your robot will stop
immediately if all 3 cli sensors detect a cli simultaneously.
12. 13.