User guide

www.vax.co.uk
6
assembly / operation
15. To secure the dirt container push the top in place,
there will be an audible click when it is secure (Fig.3/15).
4. How to Operate
Cord Release
Release the power cord by turning the quick cord release.
The cord should be inserted into the cord guide while
vacuuming to keep it out of the way (Fig.4/1)
Adjustment for Different Floor Types
Slide the height adjust lever to match the surface being
cleaned (Fig.4/2).
NOTE: For easiest adjustment, place cleaner in full
upright position.
Fig.3/14
Fig.3/15
Fig.4/1
Fig.4/2
WARNING: This cleaner has a constantly
rotating brush bar which, when left in contact
with lino, parquet and other hard flooring could
potentially cause some damage to the floor surface.
NOTE: Vax recommends that you raise the height of
the brush bar when using this cleaner on lino and hard
flooring. Vax cannot be held responsible for damage to
these surfaces if the customer fails to take notice of
this recommendation.
!
Vax V-060B Infinity User Guide.qxd:V-060B Infinity User Guide 22/10/08 11:45 Page 6