Installation guide

Unpacking and Assembling Cabinets 2-1
Chapter 2
Unpacking and Assembling
Cabinets
This chapter describes how to unpack and assemble the cabinets that com-
prise the system. A 3-cabinet system has one system cabinet, one ex-
pander cabinet, and one battery cabinet. A 5-cabinet system has one sys-
tem cabinet, two expander cabinets, and two battery cabinets.
Sections in this chapter include:
• Inspect the Shipment
• Collect Tools and Resources
• Remove Cartons and Packing Material
• Remove Cabinets from Pallets
• Position the Cabinets
• Remove Cabinet Top Covers
• Remove Front and Rear Doors
• Install Side Spacers
• Level All Cabinets
• Install Top Spacers
• Install Bottom Spacers
• Assemble and Install Side Skirts
• Assemble and Install Front Skirts
• Install End Panels
• Identify and Route Battery Cables
• Connect Battery Cables
• Install Battery Cable Connectors
• Connect the Power Control Cable
• Reinstall Cabinet Tops and Doors
• Connect the I/O Cable(s)
• Connect the DSSI Cables