Installation guide

Diagnostics and Utilities 8-11
1
Use the show configuration command to see a listing of the mod-
ules in the system. In this example, the command is executed on a
DEC 10000 system and shows the module LSB and XMI slot number
,
module name, module type, revision, mnemonic, and if self-test
passed.
The show device command displays information about each I/O de-
vice. Polling checks the XMI bus for device configurations. The next
line contains the console device name, the name of the device given
by the device controller, and the device type.
3
Show network displays information about Ethernet and FDDI con-
trollers. Polling checks the XMI bus for device configurations. Show
net includes information such as the console device name of the net-
work device with path information and the network controller’s hard
-
ware address in hex.
For more information:
Basic Troubleshooting
Operations Manual
Console Reference Manual
2