Installation guide

8-4 Diagnostics and Utilities
8.2 Verification Overview
The following process is used to verify the system after installa-
tion.
Figure 8-2 Verification Procedure
Power Up System.
Self-Test Runs.
1
Enter show
configuration to get
booting mnemonics 
2
Check console load
device hardware
3
Use show network 
command (for VAX 
10000) or show device 
command (for DEC 
10000) to get target 
device name
4
Boot
Operating System
5
Verify System Under
Operating System
6
BXB-0041C-92