Installation guide

Installing an Expander Cabinet 3-21
1. Assemble a side skirt by attaching a side skirt "upper" to a side skirt
"main" with four self-tapping screws (all assembly components are
contained in the installation kit) as shown in Figure 3-10.
2. Attach the side skirt to the outside base of the side of the cabinet as-
sembly (see Figure 3-10). This is done by aligning the two 1/4 turn
Phillips fasteners in the skirt with the matching holes in the cabinet
base. Then simply push the fasteners into the holes.
3. Repeat 1 and 2 for the other side of the cabinet assembly.