Installation guide

3-10 Console
Table 3-13 Environment Variables (Continued)
Variable Attribute Function
cpu_enabled
Nonvola-
tile
A bitmask indicating which processors are
enabled to run (leave console mode). If not
defined, all processors are considered en-
abled. Default is 0xFF.
cpu_primary
Nonvola-
tile
A bitmask indicating which processors are
enabled to become the next boot processor
after the next reset. If not defined, all
available processors are considered en-
abled. Default is 0xFF.
d_harderr
Volatile Determines action taken following a hard
error. Values are halt (default) and con-
tinue. Applies only when using the test
command.
d_report
Volatile Determines level of information provided
by the diagnostic reports. Values are sum-
mary (default) and full. Applies only
when using the test command.
d_softerr
Volatile Determines action taken following a soft
error. Values are continue (default) and
full. Applies only when using the test
command.
enable_audit
Nonvola-
tile
When set to on, allows audit trail mes-
sages to be displayed during booting.
interleave
Nonvola-
tile
The memory interleave specification. Val-
ues must be default, none, or an explicit
interleave list. Default value is default.
language
Nonvola-
tile
Determines whether system displays mes-
sage numbers or message text in English
(default).
For more information:
VAX 7000 Console Reference Manual