Installation guide

Console 3-7
Table 3-10 Show Power Command Options
Table 3-11 Test Command Options
Option Meaning
-h
History status — the value of each parameter at the last
system shutdown
-s
Current status (default)
main
Power status of the main cabinet (default)
right
Power status of the expander cabinet to the right of the
main cabinet
left
Power status of the expander cabinet to the left of the
main cabinet
Option Meaning
-write
Select writes to media as well as reads (read-only is the
default). Applicable only to disk testing (ignored other-
wise).
-nowrite
<list>
Used with -write to prevent selected devices or groups
of devices from being written to
-omit <list>
Specify device not to test; takes a single device or device
list as a qualifier
-t <time>
Run time in seconds for the test command; default for
system is 600 seconds (10 minutes).
-q
"Quiet" option prevents informational messages about
testing start and stop from being displayed on the con-
sole terminal. Error messages are always reported.