Installation guide

3-4 Console
Table 3-3 Cdp Command Options
Table 3-4 Clear EEPROM Command Options
Option Meaning
-a
Set device allocation class, allclass
-i
Select interactive mode; set all parameters
-n
Set device node name, nodename (up to 16 characters)
-o
Overridde warning messages
-u
Set device unit number, unitnum
-sa allclass
Set allclass for all DSSI devices in the system to the
specified value
-sn
Set nodename to either RFhscn or TFhscn
h is the device hose number (0–3)
s is the device slot number (1–14)
c is the device channel number (0, 1)
n is the device node ID number (0–6)
-su
unitnum
Set the starting unitnum for the first DSSI device in
the system to the specified value. Subsequent DSSI unit
numbers are incremented from this base.
Option Meaning
diag_sdd
Remove from EEPROM failure information logged by
symptom-directed diagnosis
diag_tdd
Remove from EEPROM failure information logged by
test-directed diagnosis
log
Remove from EEPROM all failure information
(symptom-directed diagnosis, test-directed diagnosis,
and operating system)
symptom
Remove from EEPROM all failure information on op-
erating system