Installation guide

7-2 Restoring Corrupted ROMs
7.1 Restoring a Corrupted EEPROM
Example 7-1 Using the Build EEPROM Command to Restore a
Corrupted EEPROM
EEPROM image failed to verify
EEPROM environment parameters not set up
Fail to update EEPROM envar on CPU 1
>>> build eeprom
Creating new EEPROM image
System Serial Number> gao1234567
Module Serial Number> sgo0000001
Module Unified 2-5-2-4 Part Number> 80-E2045-AA-0E04
Module Firmware Revision> 1.00
>>> initialize
NOTE: See Chapter 3 for more information on the console commands for
the EEPROM.
For more information:
VAX 7000 System Service Manual
VAX 7000 Console Reference Manual