Installation guide

Diagnostics 4-11
Example 4-8 Set Host Command — Running DUP-Based
Diagnostics and Utilities (Continued)
Select test number (1:4) [1] ?
Select start block number (0:547040) [0] ?
Select end block number (0:547040) [547040] ? 500
Select data pattern number 0=ALL (0:15) [0] ?
Select another drive (Y/N) [] ?
*** No default is allowed.
Select another drive (Y/N) [] ? n
Select execution time limit, 0=Infinite, minutes (0:65535) [0] ? 1
Select report interval, minutes (0:65535) [1] ? 1
Select hard error limit (0:32) [0] ?
Report soft errors (Y/N) [N] ? y
Execution Performance Summary at 17-NOV-1992 10:23:57
D0032 193832346 4315 9713 0 0 0 0
Execution Performance Summary at 17-NOV-1992 10:23:57
D0032 * 193832346 4320 9723 0 0 0 0
***
*** ILEXER is exiting.
***
Task?