Instruction manual

Push down firmly until handle locks into place
(Fig.3/2).
Storing the Cleaner
Press the telescopic handle release button on the
back of the cleaner and push handle down
(Fig.3/3).
Preparing the Vacuum
Push the telescopic handle release button and pull
handle up until it locks into place (Fig.3/4).
4. How to Operate
Cord Release
Turn the quick cord release for easy cord removal.
Secure cord in cord clip to keep out of the way
while vacuuming (Fig.4/1).
On/off Switch
Plug cord into electrical outlet. Turn cleaner on by
pressing the on/off switch located on the top of unit
(Fig.4/2).
Handle Release
Pull back handle to tilt back. Press on the front of
vacuuming head if needed (Fig.4/3).
4 5
Fig.3/2
Fig.3/3
Fig.3/4
Fig.4/1
Fig.4/2
Fig.4/3
Floor/Carpet Cleaning
Move the handle and adjust it to the desired position
for (a) operating the cleaner, and (b) lowering handle
to clean under furniture (Fig.4/4).
Carry Handle
Use the carry handle located on the top of the dirt
container lid to move the cleaner from room to
room (Fig.4/5).
5. Dirt Container & Filter:
Removal & Replacement
Depress button on top of dirt container lid to
remove dirt container (Fig.5/1).
Remove by grasping handle on dirt container lid
and turn counter clockwise (Fig.5/2).
Hold the dirt container and grasp the top of the
filter (Fig.5/3).
Twist the filter counter clockwise to unlock. Pull the
filter up and out (Fig.5/4).
Lightly brush clean filter after each use and empty
dirt container completely. (Fig.5/5).
Fig.4/4
Fig.4/5
Fig.5/1
Fig.5/2
Fig.5/3
Fig.5/4
Fig.5/5