User`s guide

System Initialization and Acceptance Testing (Normal Operation)
4.3 CPU ROM-Based Diagnostics
Example 4–4 (Cont.) Test 9E
C1 200583F8 SSC_RAM_Data *
C2 200585E8 SSC_RAM_Data_Addr *
C5 2005F414 SSC_registers *
C6 20058320 SSC_powerup *********
D0 20067BC8 V_Cache_diag_mode bypass_test_mask *********
D2 200660E8 O_Bit_diag_mode bypass_test_mask *********
DA 20068FFC PB_Flush_Cache **********
DB 20066908 Speed print_speed *********
DC 200650C8 NO_Memory_present *
DD 20067118 B_Cache_Data_debug start_add end_add add_incr *******
DE 20066CB8 B_Cache_Tag_Debug start_add end_add add_incr *******
DF 200664F0 O_BIT_DEBUG start_add end_add add_incr seg_incr ******
E0 200694D8 SCSI environment reset_bus time_s *******
E1 200695D8 SCSI_Utility environment util_nbr target_ID lun ******
E2 200696A4 SCSI_MAP bypass_test addr_incr_data_tst ********
E4 20069A60 DZ environment *********
E8 20069BF0 SYNC environment *********
E9 20069CC4 SYNC_Utility environment *********
EC 20069DA8 ASYNC environment *********
Scripts
# Description
A0 User defined scripts
A1 Powerup tests, Functional Verify, continue on error, numeric countdown
A3 Functional Verify, stop on error, test # announcements
A4 Loop on A3 Functional Verify
A6 Memory tests, mark only multiple bit errors
A7 Memory tests
A8 Memory acceptance tests, mark single and multi-bit errors, call A7
A9 Memory tests, stop on error
B2 Extended tests plus BF, then loop
B5 Extended tests, then loop
BF DZ, SYNC, ASYNC with loopbacks
Load & start system exerciser
100 Customer mode, 2 passes
101 CSSE mode, 2 passes
102 CSSE mode, continous until ^C
103 Manuf mode, continous until ^C
104 Manuf TINA mode, continous until ^C
105 Manuf mode, 2 passes
106 CSSE mode, select tests, continous until ^C
107 Manuf mode, select tests, continous until ^C
>>>
4–10 System Initialization and Acceptance Testing (Normal Operation)