User`s guide

H Related Documents
Glossary
Index
Examples
1–1 Successful Running of Memory Test Script A8 ............ 1–13
1–2 Typical Failure After Running Memory Test Script A8 ..... 1–13
4–1 Language Selection Menu . . . ........................ 4–2
4–2 Successful Diagnostic Countdown ..................... 4–3
4–3 Successful Power-Up to List of Bootable Devices . . . ....... 4–6
4–4 Test9E.......................................... 4–9
5–1 Error Log Entry Indicating CPU Error . ................ 5–16
5–2 SHOW ERROR Display Using the OpenVMS Operating
System . . ........................................ 5–17
5–3 Error Log Entry Indicating Uncorrectable ECC Error ...... 5–20
5–4 SHOW MEMORY Display Under the OpenVMS Operating
System . . ........................................ 5–21
5–5 Using ANALYZE/SYSTEM to Check the Physical Address in
Memory for a Replaced Page . ........................ 5–22
5–6 Error Log Entry Indicating Correctable ECC Error . ....... 5–25
5–7 Error Log Entry Indicating Q-Bus Error ................ 5–27
5–8 Error Log Entry Indicating Polled Error ................ 5–29
5–9 Device Attention Entry ............................. 5–31
5–10 SICL Service Request with Appended MEL File . . . ....... 5–38
5–11 Sample Output with Errors . . ........................ 5–41
5–12 FE Utility Example ................................ 5–48
5–13 Failure Due to a Missing SIMM (One 16 Mbyte Set) ....... 5–49
5–14 Failure Due to a Missing SIMM (Two 16 Mbyte Sets) ...... 5–50
5–15 Failure Due to a Bad SIMM. . ........................ 5–51
5–16 SIMM Wrong Size . ................................ 5–52
5–17 Running DRVTST . ................................ 5–55
5–18 Running DRVEXR . ................................ 5–55
5–19 Accessing the DUP Driver Utility from Console Mode
(Embedded DSSI) . . ................................ 5–56
viii