User`s guide

System Initialization and Acceptance Testing (Normal Operation)
4.1 Basic Initialization Flow
Loading system software.
Failure.
Restarting system software.
Performing normal system tests.
Tests completed.
Normal operation not possible.
Bootfile.
Memory configuration error.
No default boot device has been specified.
Available devices.
Device?
Retrying network bootstrap.
The position of the Break Enable/Disable switch has no effect on these
conditions. The firmware will not prompt for a language if the console
terminal, such as the VT100, does not support the multinational character set
(MCS).
The language selection menu is shown in Example 4–1. If no response is
received within 30 seconds, the firmware defaults to English (5).
Example 4–1 Language Selection Menu
KA52-A VX.X VMB 2.14
1) Dansk
2) Deutsch (Deutschland/Österreich)
3) Deutsch (Schweiz)
4) English (United Kingdom)
5) English (United States/Canada)
6) Español
7) Français (Canada)
8) Français (France/Belgique)
9) Français (Suisse)
10) Italiano
11) Nederlands
12) Norsk
13) Português
14) Suomi
15) Svenska
(1..15):
Note
The information contained within the parentheses indicates the specific
keyboard variant.
After the language inquiry, the firmware continues as if on a normal power-up.
4–2 System Initialization and Acceptance Testing (Normal Operation)