User`s guide

KA52/53/54 Firmware Commands
3.2 Console Commands
>>>EX SP ! Check the SP.
G 0000000E 00000000
>>>FIND /MEM ! Look for a valid 128 Kbytes.
>>>EX SP ! Note where it was found.
G 0000000E 00000200
>>>FIND /RPB ! Check for valid RPB.
?2C FND ERR 00C00004 ! None to be found here.
>>>
3.2.6 HALT
The HALT command has no effect. It is included for compatibility with other
VAX consoles.
Format:
HALT
Example:
>>>HALT ! Pretend to halt.
>>>
3.2.7 HELP
The HELP command provides information about command syntax and usage.
Format:
HELP
Example:
>>>HELP
Following is a brief summary of all the commands supported by the
console:
UPPERCASE denotes a keyword that you must type in
| denotes an OR condition
[] denotes optional parameters
<> denotes a field specifying a syntactically correct value
.. denotes one of an inclusive range of integers
... denotes that the previous item may be repeated
Valid qualifiers:
/B /W /L /Q /INSTRUCTION
/G /I /V /P /M
/STEP: /N: /NOT
/WRONG /U
KA52/53/54 Firmware Commands 3–17