User guide

vax.co.uk

charging/ operation

3. Storage/ Charging

Designed to sit in the charging base on a flat surface

or wall mountable.

IMPORTANT: Use only the charger supplied.

The V-031 is operated by rechargeable lead-acid batteries.

Before using the appliance for the first time, the batteries

have to be charged for at least 16 hours. Place the

appliance into the charging unit (Fig.3/1)

NOTE: Do not forget to set the on/off switch (B) to the

‘off’ position before charging begins.

The red charging indicator LED (A) lights up to show that

the appliance is seated correctly in the charging unit and

that charging has begun. Replace the appliance into the

charging unit when not in use, so it is always fully charged

(Fig.3/2).

4. How to Operate

To turn the appliance on and off

To turn the appliance on, slide the on/off switch into the

‘on’ position.

To turn the appliance off, slide the on/off switch into the

‘off’ position (Fig.4/1).

Battery charge status

The four green LEDs (A) indicate the remaining battery

charge. If all four LEDs light up, the batteries are fully

charged.

The fewer LED indicators that light up, the lower the

remaining battery charge. If only one LED lights up, the

battery charge is low and the appliance should be re-

charged. The batteries can be re-charged 300-350 times.

Tools

The crevice tool (A) and dusting brush (B) can be inserted

into the front nozzle (C) (Fig.4/2) .

Dust container and filter

IMPORTANT: always ensure that the dust filter

(A) is installed before using the appliance.

Fig.3/1

ONOFF

Fig.4/1

Fig.4/2

Fig.3/2

V-031B Infinity By Vax User Guide.qxd:V-031B Infinity UG 18/6/09 16:06 Page 4