Service manual

Table A–2 (Cont.): Model 300 Standard Console Error Mes-
sages
Error Message Meaning
?6A Error changing EEPROM. An error occurred in writing to the EEP-
ROM. The EEPROM contents may be cor-
rupted.
?6B EEPROM saved to tape successfully. The EEPROM contents were success-
fully written to the TK tape.
?6C EEPROM not saved to tape. The EEPROM contents were not com-
pletely written to the TK tape.
?6D EEPROM Revision = x.x/y.y. The EEPROM contents are at revi-
sion x.x with revision y.y patches.
?6E Major revision mismatch between tape
image and EEPROM.
The TK tape contains an EEPROM im-
age with a major revision different from
that found in the EEPROM. The im-
age cannot be restored.
?6F Tape image Revision = x.x/y.y. The EEPROM image on the TK tape is
at revision x.x with revision y.y patches.
?74 CONSOLE_LIMIT value too small for
proper operation. Value ignored.
?75 Error writing to tape. Tape may be write-
locked.
?83 See Loading system software below.
?84 See Failure below.
?85 See Restarting system software below.
?B0 See Initializing system below.
Failure. The console failed in a restart or boot op-
eration. Shows as ?84 in SET LAN-
GUAGE INTERNATIONAL mode.
Initializing system. The console is resetting the system in re-
sponse to a BOOT command. Shows
as ?B0 in SET LANGUAGE INTERNA-
TIONAL mode.
Console Error Messages for Model 300 A–9