Service manual

7.4 <REFERENCE>(xbi_plus) Tests — RBD 2
The <REFERENCE>(xbi_plus) ROM-based diagnostic, RBD
2, checks functions of both <REFERENCE>(xbi_plus)
modules. RBD 2 tests the <REFERENCE>(xbi_plus) modules
and can trace the subtests, pinpointing errors.
Example 7–1: <REFERENCE>(xbi_plus) Tests — RBD 2
>>> T/R ! Command to enter RBD monitor program
RBD1> ! RBD monitor prompt, where 1 is the
! hexadecimal node number of the
! processor that is currently receiving
! your input.
RBD1> ST2/TR E
1
! Runs the DWMBB RBD, testing
! the DWMBB at XMI node number E. Test
! results written to the console
! terminal:
;XBI_TEST 3.00
; T0001 T0005 T0006 T0007 T0008 T0009 T0012 T0013 T0014 T0015
; T0016 T0017 T0018 T0019 T0020 T0021 T0022 T0023 T0024 T0025
; P
2
1 8082 1
3
;000000000 00000000 00000000 00000000 00000000 00000000 00000000
RBD1> ST2/TR/T=1:26 E
4
! Runs the DWMBB RBD, testing
! the DWMBB at XMI node number E. Test
! results written to the console
! terminal:
;XBI_TEST 3.00
; T0001 T0002 T0003 T0004 T0005 T0006 T0007 T0008 T0009 T0010
; T0011 T0012 T0013 T0014 T0015 T0016 T0017 T0018 T0019 T0020
; T0021 T0022 T0023 T0024 T0025 T0026
; P 1 8082 1
;000000000 00000000 00000000 00000000 00000000 00000000 00000000
7–10 VAX 6000 Models 300 and 400 Service Manual