Service manual

6.12 Memory RBD Test Examples

RBD 3 sizes memory, runs extended memory tests,

and indicates any failing tests. Example 6–4 through

Example 6–6 show the use of various qualiﬁers.

Example 6–4: RBD 3 — Test on All Modules with Halt on Error

>>> T/R ! Command to enter RBD monitor program

RBD3> ! RBD monitor prompt, where 3 is the hexa-

! decimal node number of the processor

! that is currently receiving your input

RBD3> ST3/TR/HE ! Runs the default <REFERENCE>(XMA2) RBD

! test; test results written to the

! console terminal; tests will halt on

! any hard error found (/HE)

;XMA_RBD 3.00

; T0002 T0003 T0004 T0005 T0006 T0007 T0008

; S 3 8082 1

; XX NO_XMA2 09 T0008

; P 3 8082 1

;00000000 00000000 00000000 00000000 00000000 00000000 00000000

RBD3>

Example 6–5: RBD 3 — Test with Conﬁrm Switch

RBD3> ST3/TR/T=9:10/C ! Runs the <REFERENCE>(XMA2) RBD tests

! T0009 and T0010 only. These are

! destructive tests, so the confirm

! switch is needed. Confirm destructive

! memory test switch (/C) is required

! on tests T0001 and T0009 through T0012.

;XMA_RBD 3.00

; T0009 T0010

; P 3 8082 1

;00000000 00000000 00000000 00000000 00000000 00000000 00000000

RBD3>

6–22 VAX 6000 Models 300 and 400 Service Manual