Service manual

5.10 Vector Console Commands
Table 4–10 gives the console commands specific to the vector
processor.
Table 5–8: Vector Console Commands
Command Function
DEPOSIT Stores data in a specified address. Additional ad-
dresses can be VMR, VCR, and VLR (for Vector Mask Reg-
ister, Vector Count Register, and Vector Length Regis-
ter).
/M Defines the address space as a vector indirect register; ac-
cesses addresses 400 and higher.
/Q Quadword is the default data size for vector registers (ex-
cept for VCR and VLR).
/VE Defines the address space as the vector register set.
EXAMINE Displays the contents of a specified address. Additional ad-
dresses can be VMR, VCR, and VLR (for Vector Mask Reg-
ister, Vector Count Register, and Vector Length Regis-
ter).
/M Defines the address space as a vector indirect register; ac-
cesses addresses 400 and higher.
/Q Quadword is the default data size for vector registers (ex-
cept for VCR and VLR).
/VE Defines the address space as the vector register set.
SET CPU Specifies attributes of processors, such as eligibility to be-
come the boot processor or whether a vector processor is en-
abled.
/NOVECTOR_ENABLED Prevents a vector module from being recognized in the sys-
tem configuration.
/VECTOR_ENABLED Specifies that a vector module will be recognized in the sys-
tem configuration; the default.
5–18 VAX 6000 Models 300 and 400 Service Manual