Service manual

5.7 Vector Processor Tests — RBD 0 and RBD 1
T0038 through T0049 of RBD 0 test the vector processor
during self-test. Tests 14–17 of RBD 1 test the vector
processor during CPU/memory testing.
Example 5–3: Running RBD 0 on a Secondary Processor with an
Attached Vector Processor
>>> SET CPU 4
1
>>> T/R
RBD4> ST0/TR
2
;XRP/V_ST 2.00
; T0001 T0002 T0003 T0004 T0005 T0006 T0007 T0008 T0009 T0010
; T0011 T0012 T0013 T0014 T0015 T0016 T0017 T0018 T0019 T0020
; T0021 T0022 T0023 T0024 T0025 T0026 T0027 T0028 T0029 T0030
; T0031 T0032 T0033 T0034 T0035 T0036 T0037 T0038 T0039 T0040
; T0041 T0042 T0043 T0044 T0045 T0046 T0047 T0048 T0049
; P 2 8082 1
;00000000 00000000 00000000 00000000 000000000 00000000 00000000
In Example 5–3:
1
This command causes the <REFERENCE>(XRP) module at node 4 to
become the primary processor.
2
The prompt indicates that the CPU at node 4 is the primary processor.
RBD 0 is run on the scalar/vector processor pair at node 4.
5–14 VAX 6000 Models 300 and 400 Service Manual