Service manual

Example 4–14: Patching the EEPROM with EVUCA — Part 2
Test 4: Update EEPROM data
13
Getting selectable boot primitives for CPU 05, ROM 02.00
[I/O device types in system identified]
[Boot primitives available identified]
Available boot primitive space is 27F4
Please enter what boot primitive to delete by number. [1-3(D)] 2
Boot primitives fit into allotted EEPROM area.
Secondary cpus are being updated, please wait a maximum of 20 seconds.
14
Updating CPU 05
Test 5: Show Boot primitives
ROM boot primitives for CPU 01, revision 3.00 are:
1 This boot primitive supports the following:
- boot primitive designation DI
- boot primitive designation MI
- boot primitive designation CI
Device CIBCA, device type 0108
15
Device CIXCD, device type 0C05
.
.
.
[Messages about retrieving secondary CPU boot primitives]
CPU 02 has the same console revision as node 01.
16
Boot primitives are the same for these cpus.
ROM boot primitives for CPU 05, are:
1 This boot primitive supports the following:
- boot primitive designation CI
17
2 This boot primitive supports the following:
- boot primitive designation DU
.
.
.
EEPROM boot primitives for CPU 05 are:
1 This boot primitive supports the following:
- boot primitive designation ET
.
.
.
CPU 06 has the same console revision as node 05.
Boot primitives are the same for these cpus.
The primary CPU was not updated.
Secondary CPU 05, was successfully updated.
Example 4–14 Cont’d on next page
4–58 VAX 6000 Models 300 and 400 Service Manual