Service manual

Table 4–10 (Cont.): Console Commands

Command Function

SET LANGUAGE Changes the output of the console error messages between nu-

meric code only (international mode) and code plus explana-

tion (English mode).

SET MEMORY Designates the method of interleaving the memory mod-

ules; supersedes the console program’s default interleav-

ing.

SET TERMINAL Sets console terminal characteristics.

SHOW ALL Displays the current value of parameters set.

SHOW BOOT Displays all boot commands and nicknames that have been

saved using SET BOOT.

SHOW CONFIGURATION Displays the hardware device type and revision level for

each XMI and VAXBI node and indicates self-test sta-

tus.

SHOW CPU Identiﬁes the primary processor and the status of other proces-

sors.

SHOW ETHERNET Locates all Ethernet adapters on the system and dis-

plays their addresses.

SHOW LANGUAGE Displays the mode currently set for console error messages, in-

ternational or English.

SHOW MEMORY Displays the memory lines from the system self-test, show-

ing interleave and memory size.

SHOW TERMINAL Displays the baud rate and terminal characteristics function-

ing on the console terminal.

START Begins execution of an instruction at the address speci-

ﬁed in the command string.

STOP Halts the speciﬁed node.

TEST Passes control to the self-test diagnostics; /RBD qualiﬁer in-

vokes ROM-based diagnostics.

UPDATE Copies contents of the EEPROM on the processor exe-

cuting the command to the EEPROM of another proces-

sor.

Z Logically connects the console terminal to another proces-

sor on the <REFERENCE>(XMI) bus or to a VAXBI node.

! Introduces a comment.

<REFERENCE>(XRP) Scalar Processor 4–41