Service manual

Example 4–5: Running <REFERENCE>(XRP) Self-Test (RBD 0) on a
Secondary Processor
>>> SET CPU 2
1
>>> T/R
RBD2> ST0/TR
2
! Note that only 37 tests ran. If a vector
! processor was present 49 tests would run
;XRP/V_ST 1.00
; T0001 T0002 T0003 T0004 T0005 T0006 T0007 T0008 T0009 T0010
; T0011 T0012 T0013 T0014 T0015 T0016 T0017 T0018 T0019 T0020
; T0021 T0022 T0023 T0024 T0025 T0026 T0027 T0028 T0029 T0030
; T0031 T0032 T0033 T0034 T0035 T0036 T0037
; P 2 8082 1
;00000000 00000000 00000000 00000000 000000000 00000000 00000000
In Example 4–5:
1
This command causes the <REFERENCE>(XRP) module at node 2 to
become the primary processor.
2
The prompt indicates that the CPU at node 2 is the primary processor.
RBD 0 is run on this processor.
<REFERENCE>(XRP) Scalar Processor 4–31