Service manual

3.15 Patching the EEPROM with EVUCA
To update the console and diagnostic ROMs on all VAX 6000
systems, use EVUCA under the Diagnostic Supervisor in
standalone mode.
Example 3–12: Patching the EEPROM with EVUCA — Part 1
>>> BOOT /XMI:A /R5:110 EX0
3
[self-test display prints]
Filename: ISL_LVAX
Follow Prompts
[Diagnostic Supervisor banner]
DS> LOAD EVUCA
4
DS> ATTACH KA62B HUB KA0 1
5
DS> ATTACH KA62B HUB KA1 2
DS> ATTACH KA62B HUB KA2 5
DS> ATTACH KA62B HUB KA3 6
DS> SELECT ALL
6
DS> SET TRACE
DS> START
.. Program: EVUCA - VAX 6000 EEPROM Update Utility, revision 1.0, 5 tests,
Testing: _KA0 _KA1 _KA2 _KA3
Booting secondary CPU 02.
Booting secondary CPU 05.
Booting secondary CPU 06.
Test 2: Load data from media
Data file? <ELUCB.BIN>
7
Searching for data file...
Data file loaded.
Looking for patch for CPU 01 - ROM 06.00 EEPROM 06.00
No patch image was found for CPU 01 - ROM 06.00 EEPROM 06.00
8
Looking for patch for CPU 02 - ROM 06.00 EEPROM 06.00
No patch image was found for CPU 02 - ROM 06.00 EEPROM 06.00
Looking for patch for CPU 05 - ROM 04.10 EEPROM 04.10
Patch image is revision 04.60
Do you really want to apply this patch [(No), Yes] YES
9
Looking for patch for CPU 06 - ROM 04.10 EEPROM 04.60
Patch image is revision 04.60
Do you really want to apply this patch [(No), Yes]
Test 3: Determine Typecode Updated
10
3–50 VAX 6000 Models 300 and 400 Service Manual