Service manual

3.9 VAX/DS Diagnostics
The <REFERENCE>(xyp) software diagnostics that run
under the VAX Diagnostic Supervisor (VAX/DS) are listed
in Table 3–7. An example follows. See Section 2.4 for
instructions on running the supervisor.
Table 3–7: <REFERENCE>(xyp) VAX/DS Diagnostics
Program Description
EVSBA VAX Standalone Autosizer
EVKAQ VAX Basic Instructions Exerciser - Part 1
EVKAR VAX Basic Instructions Exerciser - Part 2
EVKAS VAX Floating Point Instruction Exerciser - Part 1
EVKAT VAX Floating Point Instruction Exerciser - Part 2
EVKAU VAX Privileged Architecture Instruction Test - Part 1
EVKAV VAX Privileged Architecture Instruction Test - Part 2
ELKAX Manual Tests
ELKMP Multiprocessor Exerciser
EVUCA VAX 6000 EEPROM Update Utility
Example 3–6: Running Standalone Processor Diagnostics
DS> RUN EVSBA
1
DS> SEL KA0
2
DS> RUN ELKAX
3
[diagnostic messages]
DS> EXIT
4
3–34 VAX 6000 Models 300 and 400 Service Manual