User manual

36
6
12 24 48 96 196
8
16 32 64 128 256
10
20 40 80 160 320
12
24 48 96 192 384
14
28 56 112 224 448
16
32 64 128 256 512
• window_mode – enable/disable window maping mode (by default disable (false)).
• window_address – window maping_address (by default equals 0160000).
• bootstrap – enable/disable bootstrap mode (by default is enable (true)).
• bootstrap _address – bootstrap_address (by default equals 0).
Examples:
# CHAPI MRV11 example
load chapi MRVA dll=chapi_mrv
set MRVA address=177000
# Total ROM capacity 6*2 KBytes = 12KBytes
set MRVA chips_installed=6
set MRVA chip_capacity=2
#ROM data file
set MRVA rom_file_name=”my_rom.rom”
#Diaseble direct mode, address do not use
#set MRVA direct_address=020000
#Enable window maping mode
set MRVA window_mode= false
set MRVA window_address=0160000
set MRVA bootstrap=true
set MRVA bootstrap_address=173000
QBUS adapter based on BCI-2104 PCI board
A generic Qbus extension, the CHAPI_QBUS device is implemented in the
CHAPI_QBUS.DLL and uses the CHAPI.DLL and the CHAPI_HW.DLL. This device is
implemented as an interconnection adapter to connect the emulated Qbus to an external
physical Qbus by means of an adapter board. With such connection, the hardware on the