User manual

CHAPI_QBUS.DLL – CHAPI implementation of bus adapter link to external QBUS cage

using BCI-2104 bus adapter;

CHAPI_S3QBUS.DLL – CHAPI implementation of bus adapter link to external QBUS cage

using CESYS PCIS3BASE bus adapter;

CHAPI_RLV12.DLL – full functional CHAPI implementation for UNIBUS RL11 / QBUS

RLV12 disk controllers supporting RL01/RL02 disk drives; It is possible to map mentioned

controllers’ disk units to the disk image container or to raw physical disk drive via windows

driver container– these containers are implemented within the “Storage CHAPI support”

library;

CHAPI_INDIO.DLL – industrial I/O CHAPI support library; It supports industrial ADC/DAC

mapped to SENSORAY Ethernet board model 2601/2608;

CHAPI_SERIAL(D).DLL – serial I/O CHAPI support library and its debug version; It

support three different kind of ports: 1) Standard COM port; 2) TCP/IP link; 3) MOXA

NPort 5210 port; All these ports can be used from any new CHAPI serial line multiplexer

developed in accordance with the “Serial I/O CHAPI support” library rules;

This library contains addition ‘seasync’ port implemented. This port can be used only with

CHAPI_DPV11 device implementation;

CHAPI_STORAGE(D).DLL – “Storage I/O CHAPI support” library and its debug version; It

provides three tape containers which can be easily reused in newly created tape

controllers to map there units to: 1) Tape image file in MTD format; 2) SCSI tape

connected to the system; 3) Windows tape driver supported hardware tape like \\.\TapeK

connected to the system. Two disk containers are provided for the moment in this library –

Disk image file and raw physical disk drive via windows driver supported hardware disks

like \\.\PhysicalDrive0 connected to the system.

CHAPI_TSV05.DLL – full functional CHAPI implementation for QBUS TSV11/TSV05 and

UNIBUS TS11 tape controllers; It allows to map tape unit to one of selected containers

provided by means of “Storage I/O CHAPI support” library: 1) Tape image file in MTD

format; 2) SCSI tape connected to the system; 3) Windows tape driver supported

hardware tape like \\.\TapeK connected to the system;

CHAPI_UNIBUS - CHAPI implementation of bus adapter link to external UNIBUS cage

using BCI-2004 bus adapter;

CHAPI_VCB02.DLL – A CHAPI implementation of the VCB02 video subsystem;

CHAPI_VT30H.DLL --- full functional CHAPI implementation for QBUS/UNIBUS VT30-H

graphics display controller.

LPV11.DLL – The CHAPI implementation of the LPV11 parallel port controller;