Installation manual

Section 7 F Creating ENVOX User Accounts

Installing and Upgrading ENVOX

Configuration Software on DEC VAX and DEC AXP Systems (Revision B — May 1998)

Step 7: Exit the authorize p rogram by entering the following command

at the prompt:

UAF> EXIT

The following messages are displayed:

%UAF-I-DONEMSG, system authorization file modified

%UAF-I-RDBDONEMSG, rights data base modified

7.2 Setting Up an ENVOX Users Directory

Set up an ENVOX users directory as follows:

Step 1: Enter the following commands at the DCL prompts:

$ SET DEF ENVOX$DISK:[ENVOX]

$ SHOW DEF

Step 2: Whether you are performing an installation or an upgrade,

you must create the ENVOX user d irectory and set the file

owner by entering the following command at the DCL prompt:

$ CREATE/DIR/OWNER_UIC= envox_user [.ENVOX_USER]

where, envox_user is the new ENVOX user’s name exactly

as it appears in the User Authorization File (UAF)

7.3 Copying the Login.Com File to the User Directory

Copy the file ENVOX$DISK:[ENVOX]LOGIN.COM to the user directory,

by entering the following command at the DCL prompt:

$ COPY LOGIN.COM [.ENVOX_USER]*.*