Installation manual

83
Upgrading Software on Client-Only Systems
F Section 6
Installin g and Upgrading ENVOX r Configuration Software on DEC VAX and DEC AXP Systems (Revision B — May 1998)
The following display appears:
Choose whether to install or de-install SYBASE and
ENVOX
Move cursor to item and press <CR>.
INSTALL SYBASE
INSTALL ENVOX
DE-INSTALL SYBASE and ENVOX
QUIT
Step 4: Move the cursor to INSTALL ENVOX and press Return.
The following display appears:
ENVOX Client-Only Upgrade
1)Tape device =
ENTER QUIT
Step 5: To upgrade from tape, enter the tape device name where the
ENVOX software media is located. To upgrade from disk,
enter the full directory pathname where the savesets are
stored.
Step 6: Move the cursor to ENTER and press Return to continue the
upgrade.
The following display appears:
Checking menu options
Please wait...
If there are no errors, the following display appears:
Options validated OK
Move cursor to item and press <CR>
PROCEED WITH INSTALLATION
MODIFY OPTIONS
QUIT
6