Installation manual

Section 5 F Upgrading Software on Client-Server Systems
76
Installing and Upgrading ENVOX r Configuration Software on DEC VAX and DEC AXP Systems (Revision B — May 1998)
Checking system
Please wait...
If there are no errors, the following display appears:
Choose whether to install or de-install ENVOX.
Move cursor to item and press <CR>.
INSTALL ENVOX
DE-INSTALL SYBASE and ENVOX
QUIT
Step 4: Move the cursor to INSTALL ENVOX and press Return.
The following display appears:
ENVOX Client-Server Upgrade
1)Tape device =
ENTER QUIT
Step 5: To upgrade from tape, enter the tape device name where the
ENVOX software is located. To upgrade from disk, enter the
full directory pathname where the savesets are stored.
Step 6: Move the cursor to ENTER and press Return to continue the
upgrade.
The following display appears:
Checking menu options
Please wait...
If there are no errors, the following display appears:
Options validated OK
Move cursor to item and press <CR>
PROCEED WITH INSTALLATION
MODIFY OPTIONS
QUIT
Step 7: Move the cursor to PROCEED WITH INSTALLATION and
press Return to continue the upgrade.
5