Installation manual

Upgrading Software on Client-Server Systems

F Section 5

Installin g and Upgrading ENVOX

Configuration Software on DEC VAX and DEC AXP Systems (Revision B — May 1998)

When you have completed the dump process for all of your databases,

complete the upgrade process as described in subsection 5.3.3.

5.3.3 Completing the Upg rade Process

Complete the upgrade process as described in the following steps:

Before completing the upgrade process, it is recommended that

you review the information in subsections 5.1.5, 3.1 and 3.2.

Note ...

Step 1: When all ENVOX and Open databases have been dumped

succe ssfully, make sure that the installation media is inserted

in the tape drive if installing from tape.

The system should be displayin g the following:

PDX dump a database or install.

Move cursor to item and press <CR>

PDX dump <TYPE> database <DBNAME>

INSTALL

QUIT

Step 2: To upgrade SYBASE, move the cursor to INSTALL, and press

Return.

The following display appears:

SYBASE Client-Server Upgrade

----------------------------

1)Tape device =

ENTER QUIT

Step 3: After entering the tape device name (or full disk directory

path), select ENTER from the above menu.