Installation manual

Section 5 F Upgrading Software on Client-Server Systems

Installing and Upgrading ENVOX

Configuration Software on DEC VAX and DEC AXP Systems (Revision B — May 1998)

Step 14: Put the first tape that was used for this PDX dump into the

tapedrive, and press Return. The PDX dump process will

continue. If another tape is needed, the prompt is repeated.

When the PDX dump has completed successfully, the

following display appears:

PDX dump of database dbname COMPLETE.

Press <CR> to continue, Ctrl-Z to exit.

See Appendix A for list of error conditions and corrective

actions.

Step 15: Proceed to Step 18.

Step 16: If you want to PDX dump your databases to disk, move the

cursor to

PDX DUMP DATABASE TO DISK, and press Return.

The following display appears:

File Characteristics

--------------------

1)PDX filename =

ENTER QUIT

Step 17: Enter a filename which you want the PDX dump file to be

called. Include the full pathname including the directories

(e.g. dka100:[dumps]envoxdb.pdx).

Move the cursor to ENTER and press Return.

The following display appears if you are dumping to disk:

Checking PDX file

Please wait...

Followed by the next display:

PDX dump of database dbname in progress

Please wait...

Step 18: Repeat the dump process, beginning with Step 8, for each

ENVOX and Open database, using a separate tape for each

database.