Installation manual

Section 5 F Upgrading Software on Client-Server Systems

Installing and Upgrading ENVOX

Configuration Software on DEC VAX and DEC AXP Systems (Revision B — May 1998)

5.3.2 Dumping Data from ENVOX and Open Databases —

ENVOX P3.4

Dump the data from ENVOX and Open databases which are on ENVOX

version P3.4 as described in the steps below:

Step 1: If your system is not already running OpenVMS V7.1 and

DECwindows Motif version V1.2-3(VAX system) and version

V1.2-4(AXP system), then upgrade your VAX or AXP systems

to these software versions.

Step 2: If you are not logged into the system manager’s account, log

in by entering the user name SYSTEM and the password at

the prompts:

Username: SYSTEM

Password: your_password

The DCL prompt appears.

Step 3: Insert and make ready the installation media, and read the

installation script from the media by entering the following

command at the DCL prompt:

$ backup tapedrive:syb_envox_inst.a/sav *.*/new

where tapedrive is the name of your tapedrive if upgrading

from tape, or the full directory pathname where the savesets

are stored if upgrading from disk.

Step 4: Start the installation script by entering the following command

at the DCL prompt:

$ run sybase_envox_install

The following display appears:

Checking System

Please wait...

If there are no errors, the following display appears:

Choose whether to install or de-install SYBASE and ENVOX

Move cursor to item and press <CR>.

INSTALL SYBASE

INSTALL ENVOX

DE-INSTALL SYBASE and ENVOX

QUIT