Installation manual

59
Upgrading Software on Client-Server Systems
F Section 5
Installin g and Upgrading ENVOX r Configuration Software on DEC VAX and DEC AXP Systems (Revision B — May 1998)
5.2.3 Completing the Upg rade Process
Complete the upgrade process as described in the following steps:
Before completing the upgrade process, it is recommended that
you review the information in subsections 5.1.5, 3.1 and 3.2.
Note ...
Step 1: Follow the instructions given in section 8.5 to de-install
SYBASE and ENVOX software.
Step 2: Upgrade your VAX or AXP system to OpenVMS V7.1 and
DECwindows Motif version V1.2-3(VAX system) and version
V1.2-4(AXP system).
Step 3: Follow the instructions in subsection 3.3 to install SYBASE on
a client-server system.
Step 4: Follow the instructions in subsection 4.1 to install ENVOX
P4.0 software on a client-server syste m.
Step 5: Create logical devices as described in subsection 5.4.
Step 6: Create ENVOX and OPEN databases as described in
subsection 5.4.
Step 7: Load ENVOX and Open databases with the PDX utility as
described in subsection 5.4
5